Front Left & Right Outer Tie Rod End Ball Joint Pair 6007071-00-B for Tesla Model S 2012–2016 | Front Steering Track Rod End OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

🛠️ Front Outer Tie Rod End Ball Joint Pair – OEM 6007071-00-B (Tesla Model S 2012–2016)

Eliminate steering play, front-end clunking, uneven tire wear and alignment drift with the COWIN OEM-Standard Front Outer Tie Rod End Ball Joint Pair.
Precision-manufactured to match Tesla 6007071-00-B specifications, these outer track rod ends restore factory steering precision,
improve handling responsiveness and deliver direct bolt-on fitment without modification for Model S platforms (2012–2016).

✅ الميزات والفوائد الرئيسية

• Complete Pair: Includes both LH and RH front outer tie rod ends — no need to order separately.
• تركيبات المعدات الأصلية: Direct replacement for 6007071-00-B and all cross-referenced part numbers (-00-A, -00-C, -00-D variants).
• تغطية السيارة: Tesla Model S (2012–2016 all trims: 60/85/90/100/P85/P100D/Ludicrous/LR).
• Precise Steering: Restores steering feel and eliminates front-end looseness for safer, more predictable handling.
• هيكل متين: Forged steel shaft + heat-treated ball stud + anti-rust coating (≥96h salt spray test).
• تجميع كامل: Supplied with pre-installed dust boot, pre-lubricated ball joint and locking nut for full service replacement.
• 100% Tested: Validated for ball stud pull-out strength, rotational torque consistency and dust boot sealing under pressure.

🚗 توافق المركبة

⚙️ المواصفات التقنية

• المنتج: Front Outer Tie Rod End Ball Joint (Steering Track Rod End) – Pair
• الحالة: Brand NEW (Set of 2)
• OE Part Number: 6007071-00-B, 6007071-00-A, 6007071-00-C, 6007071-00-D
• Cross Reference: 1044632-00-B, 1044632-00-A, 1044632-00-C
• المادة: High-Strength Forged Steel Shaft + Carbon Steel Housing
• Ball Stud: Heat-Treated, Pre-Lubricated (Grease-Filled)
• Dust Boot: Premium Rubber, Weather-Sealed (Pre-installed)
• معالجة السطح: Zinc Plating + Anti-Corrosion (≥96h Salt Spray)
• التركيب: Direct Bolt-On / Plug & Play
• Hardware: Locking Nut Included (Both Sides)
• الجودة: 100% Dimensional & Pull-Out Strength Tested (IATF16949 Process)

🛠️ ملاحظة التثبيت 🛠️

Professional installation is strongly recommended due to steering system safety criticality.
Support the vehicle securely on a lift or jack stands before disassembly.
This set includes both left and right outer tie rod ends — replacing as a pair ensures balanced steering geometry.
Use proper torque specifications for the tie rod end locking nut (refer to Tesla service manual for exact values).
Count the number of exposed threads on the inner tie rod before removal to aid in preliminary alignment setup.
A full 4-wheel alignment must be performed after installation to set correct toe angle and prevent uneven tire wear.
Note: When removing the outer tie rod, use a dedicated tie rod separator (pickle fork or ball joint puller) to avoid damaging the steering knuckle or CV boot.

🏭 لماذا تختار قطع غيار السيارات COWIN؟

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive steering & suspension components.
Our Tesla Model S outer tie rod end ball joints are produced under IATF16949-certified processes, with precision CNC machining,
induction-hardened ball studs and rigorous life-cycle testing to meet or exceed OEM steering performance standards for global EV aftermarket clients.