Contacto
  • Início
  • Produtos
  • EV parts
  • Front Left Right Axle Steering Track Outer Rod End Ball Joints Compatible with Tesla Model S 12-16 6007071-00-B
EV parts
EV parts
EV parts
EV parts
EV parts
EV parts
EV parts
EV parts

Front Left Right Axle Steering Track Outer Rod End Ball Joints Compatible with Tesla Model S 12-16 6007071-00-B

Front Outer Tie Rod End Ball Joint Pair – 6007071-00-B (LH + RH)
NEW left & right front outer steering track rod end ball joints for Tesla Model S (2012–2016).
Position: Front Axle Outer Tie Rod End / Track Rod End (Left + Right Pair)
OE Reference: 6007071-00-B, 6007071-00-A, 6007071-00-C, 6007071-00-D
Material: Forged Steel Shaft + Premium Rubber Dust Boot + Grease-Filled Housing.
Direct bolt-on OEM replacement, includes lock nuts, sold as complete Left + Right pair.

Obter cotações imediatas

 

Front Left & Right Outer Tie Rod End Ball Joint Pair 6007071-00-B for Tesla Model S 2012–2016 | Front Steering Track Rod End OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

 

🛠️ Front Outer Tie Rod End Ball Joint Pair – OEM 6007071-00-B (Tesla Model S 2012–2016)

Eliminate steering play, front-end clunking, uneven tire wear and alignment drift with the COWIN OEM-Standard Front Outer Tie Rod End Ball Joint Pair.
Precision-manufactured to match Tesla 6007071-00-B specifications, these outer track rod ends restore factory steering precision,
improve handling responsiveness and deliver direct bolt-on fitment without modification for Model S platforms (2012–2016).

Principais caraterísticas e vantagens

  • Complete Pair: Includes both LH and RH front outer tie rod ends — no need to order separately.
  • Montagem OEM: Direct replacement for 6007071-00-B and all cross-referenced part numbers (-00-A, -00-C, -00-D variants).
  • Cobertura do veículo: Tesla Model S (2012–2016 all trims: 60/85/90/100/P85/P100D/Ludicrous/LR).
  • Precise Steering: Restores steering feel and eliminates front-end looseness for safer, more predictable handling.
  • Construção duradoura: Forged steel shaft + heat-treated ball stud + anti-rust coating (≥96h salt spray test).
  • Montagem completa: Supplied with pre-installed dust boot, pre-lubricated ball joint and locking nut for full service replacement.
  • 100% Tested: Validated for ball stud pull-out strength, rotational torque consistency and dust boot sealing under pressure.

🚗 Compatibilidade de veículos

Marca Modelo Intervalo de anos Posição Lado Nota
Tesla Model S (5YJS) 2012–2016 Front Outer Tie Rod End (Track Rod End) LH + RH (Pair) 60/85/90/100/P85/P100D/Ludicrous/LR

⚙️ Especificações técnicas

  • Produto: Front Outer Tie Rod End Ball Joint (Steering Track Rod End) – Pair
  • Estado: Brand NEW (Set of 2)
  • OE Part Number: 6007071-00-B, 6007071-00-A, 6007071-00-C, 6007071-00-D
  • Cross Reference: 1044632-00-B, 1044632-00-A, 1044632-00-C
  • Material: High-Strength Forged Steel Shaft + Carbon Steel Housing
  • Ball Stud: Heat-Treated, Pre-Lubricated (Grease-Filled)
  • Dust Boot: Premium Rubber, Weather-Sealed (Pre-installed)
  • Tratamento de superfície: Zinc Plating + Anti-Corrosion (≥96h Salt Spray)
  • Instalação: Direct Bolt-On / Plug & Play
  • Hardware: Locking Nut Included (Both Sides)
  • Qualidade: 100% Dimensional & Pull-Out Strength Tested (IATF16949 Process)

🛠️ Nota de instalação

Professional installation is strongly recommended due to steering system safety criticality.
Support the vehicle securely on a lift or jack stands before disassembly.
This set includes both left and right outer tie rod ends — replacing as a pair ensures balanced steering geometry.
Use proper torque specifications for the tie rod end locking nut (refer to Tesla service manual for exact values).
Count the number of exposed threads on the inner tie rod before removal to aid in preliminary alignment setup.
A full 4-wheel alignment must be performed after installation to set correct toe angle and prevent uneven tire wear.
Note: When removing the outer tie rod, use a dedicated tie rod separator (pickle fork or ball joint puller) to avoid damaging the steering knuckle or CV boot.

Porquê escolher a COWIN Auto Parts?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive steering & suspension components.
Our Tesla Model S outer tie rod end ball joints are produced under IATF16949-certified processes, with precision CNC machining,
induction-hardened ball studs and rigorous life-cycle testing to meet or exceed OEM steering performance standards for global EV aftermarket clients.

 

FAQs sobre produtos personalizados

cowin é uma empresa líder na indústria de autopeças da China. Aderimos a tecnologias profissionais, produtos de alto desempenho e excelente serviço pós-venda para atender às necessidades dos clientes em todo o mundo. cowin China vai se esforçar para ser o seu fornecedor one-stop. Apresente os seus requisitos específicos e nós trabalharemos consigo para encontrar soluções!

Sim, podemos fornecer uma garantia de um ano para cada produto, para que possa vender sem preocupações.

Pode adicionar o seu logótipo ao nosso produto, e tudo isto pode ser personalizado de acordo com as suas necessidades.

Sim, fornecer desenhos de conceção do produto e requisitos de dimensão.

 

Os produtos em stock podem ser entregues no prazo de 7 dias, enquanto o prazo de entrega para a produção em massa é de 30-60 dias após a receção do depósito.

 

O prazo de entrega produzirá efeitos nas seguintes condições: (1) Recebemos o seu depósito; (2) Obtivemos a sua confirmação final dos produtos.

 

Se o nosso prazo de entrega não puder cumprir o seu prazo, queira comunicar as suas necessidades específicas ao seu representante de vendas.

 

Em todos os casos, faremos todos os esforços para satisfazer as suas necessidades, e podemos fazê-lo na maioria dos casos.

Sim, utilizamos sempre embalagens de exportação de alta qualidade. Para as mercadorias perigosas, também utilizamos embalagens profissionais para mercadorias perigosas; as embalagens profissionais e os requisitos de embalagem não normalizados podem implicar custos adicionais.

Temos uma equipa de serviço profissional, manteremos informações actualizadas sobre a produção/embalagem/expedição/entrega quando fizer uma encomenda.

Os clientes também pesquisaram

Um fornecedor chinês profissional de produtos multifuncionais, incluindo peças exteriores para automóveis, peças para motores, peças para chassis, etc. Apresentamos-lhe várias soluções alternativas abaixo.

Wholesale / Bulk Price 2017 – 2022 TESLA MODEL 3 REAR LEFT SIDE CONTROL ARM SET OF 5 OEM 104445100F

Rear Lower Aft Link Assembly – 1044451-00-F (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower aft link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Aft Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044451-00-F, 1044451-00-E, 1044451-00-D
Material: High-strength steel with proprietary rust-inhibitive coating and premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

## 详情页 HTML 代码

Ler mais »

OE Standard / High Performance 2018 Tesla Model 3 Rear Lower Fore Link 1044444-00-A

Rear Lower Fore Link – 1044444-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower fore link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Forward Control Arm Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044444-00-A, 1044444-00-B, 1044441-00-F
Material: High-strength forged aluminum alloy/steel with premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Ler mais »

OE Standard / High Performance 12-20 Tesla Model S X Rear Left Suspension Upper Control Arm Link 1027421-00-E

Rear Upper Link Assembly – 1027421-00-E (LEFT & RIGHT Compatible)
NEW OEM-standard rear upper link assembly for Tesla Model S (2012–2020) and Model X.
Position: Rear Axle Upper Control Arm / Upper Link Assembly
OE Reference: 1027421-00-E, 1021418-00-A, 1027426-00-C
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joints.
Direct bolt-on OEM replacement to restore suspension geometry and eliminate clunking.

Ler mais »

One-Stop Supplier Rear axle stabilizer bar left/right 1027491 00 A Compatible with Tesla Model X

Rear Stabilizer Bar Link (Sway Bar End Link) – 1027491-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear stabilizer bar link for Tesla Model X (2015–2023).
Position: Rear Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1027491-00-A
Material: High-strength iron/steel with corrosion-resistant coating.
Direct bolt-on replacement to eliminate rear-end clunking noises and restore suspension stability.

Ler mais »

Suspension Rod Front L or R Stabilizer Links Sway Bar Link Tie Rod End for 2014-2020 TESLA Model S 1030603 00 B 103060300B 100% Tested

Front Stabilizer Bar Link (Sway Bar End Link) – 1030603-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard front stabilizer bar link for Tesla Model S (2014–2020).
Position: Front Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1030603-00-B, 103060300B, 1030603-00-A, 1030603-00-C
Material: High-strength powder-coated steel with pre-installed sealed ball joints and rubber dust boots.
Direct bolt-on replacement to eliminate front-end clunking noises and restore suspension stability.

Ler mais »

One-Stop Supplier 2012-2018 Compatible With Tesla Model S Rear Right/Left Lower Control Arm Oem 6006774-00-B 600677400B

Rear Lower Control Arm – 6006774-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower control arm for Tesla Model S (2012–2018) and Model X.
Position: Rear Axle Lower Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 6006774-00-B, 600677400B, 1021416-00-D, 1027451-00-F
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joint.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Ler mais »

Contactar-nos

logo

Obter mais benefícios desde Enviar o formulário de informação

*Respeitamos a sua confidencialidade e todas as informações são protegidas.

Contacte-nos agora mesmo, obtenha resposta hoje.

Sou o Leo, o chefe da equipa de vendas da Cowin . Eu e a minha equipa teremos todo o prazer em conhecê-lo e saber tudo sobre o seu negócio, requisitos e expectativas.
Carson
Paulo
Tom