Contact
A/C Compressor
A/C Compressor
A/C Compressor
A/C Compressor

TSE14C 88310-02710 CAR AC Compressor For Toyota Corolla Matrix 2010-2013 1.8L

AC Compressor – TSE14C / 88310-02710
OEM-standard A/C compressor for Toyota Corolla & Matrix 2010–2013 1.8L.
Compressor Type: TSE14C | Voltage: 12V | Pulley: 6-Groove (6PK)
Direct replacement, pre-filled with PAG 46 oil, clutch included.
OE Reference: 88310-02710, 88310-02711, 4471504840.

Get Instant Quotes

AC Compressor TSE14C 88310-02710 for Toyota Corolla Matrix 2010–2013 1.8L | Plug & Play OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

 

 AC Compressor – OEM 88310-02710 (Toyota Corolla / Matrix 1.8L 2010–2013)

Restore your vehicle’s air conditioning efficiency with the COWIN OEM-Standard AC Compressor (TSE14C).
Precision-manufactured to match Toyota 88310-02710 specifications, this unit delivers stable compression,
low-noise operation and factory-correct bolt-on fitment for hassle-free installation.

✅ Key Features & Benefits

  • OEM Fitment: Direct replacement for 88310-02710, 88310-02711, 4471504840, 4472809060.
  • Vehicle Coverage: Toyota Corolla 2010–2013 1.8L / Toyota Matrix 2010–2013 1.8L.
  • Plug & Play: Complete assembly with clutch, pulley and mounting points—no modification required.
  • Efficient Cooling: TSE14C displacement optimized for 1.8L engine A/C load and rapid cabin cooling.
  • 100% Tested: Each unit validated for pressure resistance, vacuum retention, noise and vibration.

🚗 Vehicle Compatibility

Brand Model Year Range Engine Note
Toyota Corolla 2010–2013 1.8L L4 All Trims (CE/LE/S/XLE etc.)
Toyota Matrix 2010–2013 1.8L L4 Base Wagon 4-Door

⚙️ Technical Specifications

  • Product: AC Compressor (Automotive A/C)
  • OE Part Number: 88310-02710, 88310-02711
  • Compressor Type: TSE14C
  • Voltage: 12V
  • Pulley: 6-Groove (6PK), ~120–125mm Diameter
  • Clutch: Included & Pre-assembled
  • Refrigerant: R134a
  • Compressor Oil: PAG 46 (Pre-filled / ~130–150ml)
  • Installation: Direct Bolt-On / Plug & Play
  • Quality: 100% Pressure & Leak Tested

🛠️ Installation Note

Disconnect the vehicle battery before starting work.
Recover existing refrigerant using certified A/C recovery equipment—do not vent to atmosphere.
Inspect and flush the A/C system if the old compressor failed internally; replace receiver drier / accumulator and expansion valve as needed.
Evacuate the system under vacuum for a minimum of 30 minutes and confirm stable vacuum before recharging.
Verify clutch engagement, pressure readings and vent temperature after installation.

🏭 Why Choose COWIN Auto Parts?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive components.
Our AC compressors are produced under strict quality control, simulating real-world operating conditions
to ensure durability, efficiency and long-term reliability for global aftermarket clients.

 

 

Custom product FAQs

cowin is a leading enterprise in China’s auto parts industry. We adhere to professional technologies, high-performance products and excellent after-sales service to meet the needs of customers worldwide. cowin China will strive to be your one-stop supplier. Put forward your specific requirements, and we will work with you to find solutions!

Yes, we can provide a one-year warranty for each product, so you can sell without any worries.

You can add your logo to our product, and all these can be customized according to your needs.

Yes, please provide product design drawings and size requirements.

 

Products in stock can be delivered within 7 days, while the lead time for mass production is 30-60 days after receiving the deposit.

 

The delivery lead time shall take effect under the following conditions: (1) We have received your deposit; (2) We have obtained your final confirmation of the products.

 

If our delivery lead time cannot meet your deadline, please communicate your specific requirements with your sales representative.

 

In all cases, we will make every effort to meet your needs, and we can do so in most instances.

Yes, we always use high-quality export packaging. For dangerous goods, we also apply professional dangerous goods packaging; professional packaging and non-standard packaging requirements may incur additional costs.

We have professional service team,we will keep update information about production/packing/shipping/delivery when you place an order.

Customers Also Searched

A professional Chinese supplier of multi-functional products including automotive exterior parts, engine parts, chassis parts, etc. We provide you with several alternative solutions below.

Wholesale Rear Left Control Arm for Tesla Model 3 (2017-2022). Set of 5, OEM 104445100F. Premium COWIN suspension parts for bulk buyers and distributors.

Rear Lower Aft Link Assembly – 1044451-00-F (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower aft link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Aft Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044451-00-F, 1044451-00-E, 1044451-00-D
Material: High-strength steel with proprietary rust-inhibitive coating and premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

## 详情页 HTML 代码

Read More »

OE Standard / High Performance 2018 Tesla Model 3 Rear Lower Fore Link 1044444-00-A

Rear Lower Fore Link – 1044444-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower fore link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Forward Control Arm Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044444-00-A, 1044444-00-B, 1044441-00-F
Material: High-strength forged aluminum alloy/steel with premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Read More »

Suspension Upper Control Arm Link for Tesla Model S/X (2012-2020). OEM 1027421-00-E. Heavy-duty suspension solution from COWIN. Inquire for wholesale rates.

Rear Upper Link Assembly – 1027421-00-E (LEFT & RIGHT Compatible)
NEW OEM-standard rear upper link assembly for Tesla Model S (2012–2020) and Model X.
Position: Rear Axle Upper Control Arm / Upper Link Assembly
OE Reference: 1027421-00-E, 1021418-00-A, 1027426-00-C
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joints.
Direct bolt-on OEM replacement to restore suspension geometry and eliminate clunking.

Read More »

One-Stop Supplier Rear axle stabilizer bar left/right 1027491 00 A Compatible with Tesla Model X

Rear Stabilizer Bar Link (Sway Bar End Link) – 1027491-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear stabilizer bar link for Tesla Model X (2015–2023).
Position: Rear Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1027491-00-A
Material: High-strength iron/steel with corrosion-resistant coating.
Direct bolt-on replacement to eliminate rear-end clunking noises and restore suspension stability.

Read More »

Suspension Rod Front L or R Stabilizer Links Sway Bar Link Tie Rod End for 2014-2020 TESLA Model S 1030603 00 B 103060300B 100% Tested

Front Stabilizer Bar Link (Sway Bar End Link) – 1030603-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard front stabilizer bar link for Tesla Model S (2014–2020).
Position: Front Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1030603-00-B, 103060300B, 1030603-00-A, 1030603-00-C
Material: High-strength powder-coated steel with pre-installed sealed ball joints and rubber dust boots.
Direct bolt-on replacement to eliminate front-end clunking noises and restore suspension stability.

Read More »

Rear Lower Control Arm for Tesla Model S (2012-2018). OE 6006774-00-B. Robust construction and factory-direct wholesale pricing from COWIN Auto Parts.

Rear Lower Control Arm – 6006774-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower control arm for Tesla Model S (2012–2018) and Model X.
Position: Rear Axle Lower Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 6006774-00-B, 600677400B, 1021416-00-D, 1027451-00-F
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joint.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Read More »

Request a Custom Quote

logo

Access our full range of 5,000+ IATF 16949 certified auto parts.

*We respect your confidentiality and all information are protected.

Download Our 2026 Product Catalogue

I’m Leo, the head of sales team at Cowin
.Tell us which vehicle series (e.g., Tesla, VW, Audi) you are most interested in.

Carson
Paul
Tom