Póngase en contacto con
A/C Compressor
A/C Compressor
A/C Compressor
A/C Compressor

TSE14C 88310-02710 CAR AC Compressor For Toyota Corolla Matrix 2010-2013 1.8L

AC Compressor – TSE14C / 88310-02710
OEM-standard A/C compressor for Toyota Corolla & Matrix 2010–2013 1.8L.
Compressor Type: TSE14C | Voltage: 12V | Pulley: 6-Groove (6PK)
Direct replacement, pre-filled with PAG 46 oil, clutch included.
OE Reference: 88310-02710, 88310-02711, 4471504840.

Obtenga presupuestos al instante

AC Compressor TSE14C 88310-02710 for Toyota Corolla Matrix 2010–2013 1.8L | Plug & Play OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

 

 AC Compressor – OEM 88310-02710 (Toyota Corolla / Matrix 1.8L 2010–2013)

Restore your vehicle’s air conditioning efficiency with the COWIN OEM-Standard AC Compressor (TSE14C).
Precision-manufactured to match Toyota 88310-02710 specifications, this unit delivers stable compression,
low-noise operation and factory-correct bolt-on fitment for hassle-free installation.

Principales características y ventajas

  • Ajuste OEM: Direct replacement for 88310-02710, 88310-02711, 4471504840, 4472809060.
  • Cobertura del vehículo: Toyota Corolla 2010–2013 1.8L / Toyota Matrix 2010–2013 1.8L.
  • Plug & Play: Complete assembly with clutch, pulley and mounting points—no modification required.
  • Efficient Cooling: TSE14C displacement optimized for 1.8L engine A/C load and rapid cabin cooling.
  • 100% Tested: Each unit validated for pressure resistance, vacuum retention, noise and vibration.

🚗 Compatibilidad con vehículos

Marca Modelo Año Rango Motor Nota
Toyota Corolla 2010–2013 1.8L L4 All Trims (CE/LE/S/XLE etc.)
Toyota Matriz 2010–2013 1.8L L4 Base Wagon 4-Door

⚙️ Especificaciones técnicas

  • Producto: AC Compressor (Automotive A/C)
  • OE Part Number: 88310-02710, 88310-02711
  • Compressor Type: TSE14C
  • Tensión: 12V
  • Pulley: 6-Groove (6PK), ~120–125mm Diameter
  • Clutch: Included & Pre-assembled
  • Refrigerant: R134a
  • Compressor Oil: PAG 46 (Pre-filled / ~130–150ml)
  • Instalación: Direct Bolt-On / Plug & Play
  • Calidad: 100% Pressure & Leak Tested

🛠️ Nota de instalación

Disconnect the vehicle battery before starting work.
Recover existing refrigerant using certified A/C recovery equipment—do not vent to atmosphere.
Inspect and flush the A/C system if the old compressor failed internally; replace receiver drier / accumulator and expansion valve as needed.
Evacuate the system under vacuum for a minimum of 30 minutes and confirm stable vacuum before recharging.
Verify clutch engagement, pressure readings and vent temperature after installation.

🏭 ¿Por qué elegir COWIN Auto Parts?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive components.
Our AC compressors are produced under strict quality control, simulating real-world operating conditions
to ensure durability, efficiency and long-term reliability for global aftermarket clients.

 

 

Preguntas frecuentes sobre productos personalizados

cowin es una empresa líder en la industria de piezas de automóviles de China. Nos adherimos a las tecnologías profesionales, productos de alto rendimiento y excelente servicio post-venta para satisfacer las necesidades de los clientes en todo el mundo. cowin China se esforzará por ser su proveedor de ventanilla única. Preséntenos sus requisitos específicos y trabajaremos con usted para encontrar soluciones.

Sí, podemos ofrecer un año de garantía para cada producto, para que pueda vender sin preocupaciones.

Puede añadir su logotipo a nuestro producto, y todos ellos pueden personalizarse según sus necesidades.

Sí, facilite los planos de diseño del producto y los requisitos de tamaño.

 

Los productos en stock pueden entregarse en 7 días, mientras que el plazo de producción en serie es de 30-60 días tras recibir el depósito.

 

El plazo de entrega entrará en vigor en las siguientes condiciones: (1) Hemos recibido su depósito; (2) Hemos obtenido su confirmación final de los productos.

 

Si nuestro plazo de entrega no se ajusta a sus necesidades, comuníquelo a su representante de ventas.

 

En cualquier caso, haremos todo lo posible por satisfacer sus necesidades, y podremos hacerlo en la mayoría de los casos.

Sí, siempre utilizamos embalajes de exportación de alta calidad. En el caso de mercancías peligrosas, también aplicamos un embalaje profesional para mercancías peligrosas; el embalaje profesional y los requisitos de embalaje no estándar pueden conllevar costes adicionales.

Contamos con un equipo de servicio profesional, mantendremos información actualizada sobre producción/embalaje/envío/entrega cuando realice un pedido.

Los clientes también buscaron

Un proveedor chino profesional de productos multifuncionales que incluyen piezas exteriores de automóviles, piezas de motor, piezas de chasis, etc. A continuación le ofrecemos varias soluciones alternativas.

Wholesale Rear Left Control Arm for Tesla Model 3 (2017-2022). Set of 5, OEM 104445100F. Premium COWIN suspension parts for bulk buyers and distributors.

Rear Lower Aft Link Assembly – 1044451-00-F (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower aft link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Aft Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044451-00-F, 1044451-00-E, 1044451-00-D
Material: High-strength steel with proprietary rust-inhibitive coating and premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

 

Leer Más »

OE Standard / High Performance 2018 Tesla Model 3 Rear Lower Fore Link 1044444-00-A

Rear Lower Fore Link – 1044444-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower fore link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Forward Control Arm Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044444-00-A, 1044444-00-B, 1044441-00-F
Material: High-strength forged aluminum alloy/steel with premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Leer Más »

Suspension Upper Control Arm Link for Tesla Model S/X (2012-2020). OEM 1027421-00-E. Heavy-duty suspension solution from COWIN. Inquire for wholesale rates.

Rear Upper Link Assembly – 1027421-00-E (LEFT & RIGHT Compatible)
NEW OEM-standard rear upper link assembly for Tesla Model S (2012–2020) and Model X.
Position: Rear Axle Upper Control Arm / Upper Link Assembly
OE Reference: 1027421-00-E, 1021418-00-A, 1027426-00-C
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joints.
Direct bolt-on OEM replacement to restore suspension geometry and eliminate clunking.

Leer Más »

One-Stop Supplier Rear axle stabilizer bar left/right 1027491 00 A Compatible with Tesla Model X

Rear Stabilizer Bar Link (Sway Bar End Link) – 1027491-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear stabilizer bar link for Tesla Model X (2015–2023).
Position: Rear Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1027491-00-A
Material: High-strength iron/steel with corrosion-resistant coating.
Direct bolt-on replacement to eliminate rear-end clunking noises and restore suspension stability.

Leer Más »

Suspension Rod Front L or R Stabilizer Links Sway Bar Link Tie Rod End for 2014-2020 TESLA Model S 1030603 00 B 103060300B 100% Tested

Front Stabilizer Bar Link (Sway Bar End Link) – 1030603-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard front stabilizer bar link for Tesla Model S (2014–2020).
Position: Front Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1030603-00-B, 103060300B, 1030603-00-A, 1030603-00-C
Material: High-strength powder-coated steel with pre-installed sealed ball joints and rubber dust boots.
Direct bolt-on replacement to eliminate front-end clunking noises and restore suspension stability.

Leer Más »

Rear Lower Control Arm for Tesla Model S (2012-2018). OE 6006774-00-B. Robust construction and factory-direct wholesale pricing from COWIN Auto Parts.

Rear Lower Control Arm – 6006774-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower control arm for Tesla Model S (2012–2018) and Model X.
Position: Rear Axle Lower Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 6006774-00-B, 600677400B, 1021416-00-D, 1027451-00-F
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joint.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Leer Más »

Request a Custom Quote

logo

Access our full range of 5,000+ IATF 16949 certified auto parts.

*Respetamos su confidencialidad y toda la información está protegida.

Download Our 2026 Product Catalogue

I’m Leo, the head of sales team at Cowin
.Tell us which vehicle series (e.g., Tesla, VW, Audi) you are most interested in.

Carson
Paul
Tom