Front Stabilizer Bar Link (Sway Bar End Link) 1030603-00-B for Tesla Model S 2014–2020 | Front Axle Left & Right Compatible OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

🛠️ Front Stabilizer Bar Link – OEM 1030603-00-B (Tesla Model S 2014–2020)

Eliminate front suspension clunking, steering wander and body roll instability with the COWIN OEM-Standard Front Stabilizer Bar Link (1030603-00-B).
Precision-manufactured to match Tesla Model S front sway bar specifications, this symmetrical end link connects the front stabilizer bar to the strut assembly,
reduces NVH (noise, vibration, harshness) and delivers direct bolt-on fitment without modification for Model S platforms (2014–2020).

Principais caraterísticas e vantagens

• Montagem OEM: Direct replacement for 1030603-00-B and all cross-referenced part numbers (-00-A, -00-C, -00-D variants).
• Both Sides Same Part: Symmetrical design fits Front Left (LH) AND Front Right (RH) – no need to distinguish side-specific part numbers.
• Cobertura do veículo: Tesla Model S (2014–2020 all trims: 60/70/75/85/90/100/P85D/P100D/Ludicrous/LR).
• Construção duradoura: Powder-coated forged steel housing + heat-treated ball stud + anti-corrosion coating (≥96h salt spray test).
• Montagem completa: Supplied with pre-installed rubber dust boots, lubricated ball joints and mounting nuts for full service replacement.
• 100% Tested: Validated for rotational torque, pull-out strength and sealing performance under simulated load conditions.

🚗 Compatibilidade de veículos

⚙️ Especificações técnicas

• Produto: Front Stabilizer Bar Link / Sway Bar End Link (Sold Individually)
• Estado: Brand NEW
• OE Part Number: 1030603-00-B, 103060300B
• Cross Reference: 1030603-00-A, 1030603-00-C, 1030603-00-D, 6007996-00-A, 6007996-00-B
• Lado: Both Sides (LH + RH Symmetrical / Interchangeable)
• Material: High-Strength Powder-Coated Steel
• Ball Stud: Heat-Treated, Pre-Lubricated (Grease-Filled)
• Dust Boot: Premium Rubber, Weather-Sealed (Pre-installed)
• Tratamento de superfície: Zinc Plating + Powder Coating (≥96h Salt Spray)
• Instalação: Direct Bolt-On / Plug & Play
• Hardware: Mounting Nuts Included
• Qualidade: 100% Dimensional & Torque Tested (IATF16949 Process)

🛠️ Nota de instalação

Professional installation is strongly recommended due to suspension safety criticality.
Support the vehicle securely on a lift or jack stands before disassembly; enable Jack Mode on the touchscreen (Controls > Service > Jack Mode).
This part fits BOTH front left and right sides – confirm quantity (2 pcs recommended per axle) before ordering.
Counter-hold the ball stud with a hex socket while loosening/tightening the nut to prevent stud rotation.
Final tightening should be performed at ride height (vehicle on ground or suspension loaded) to prevent premature bushing wear and geometry shift.
Reference torque: ~70 Nm (51.6 ft-lbs) depending on Tesla service manual spec; always use new lock nuts.
Although an alignment is generally not required for sway bar links alone, a suspension inspection and alignment check is recommended after any chassis work.
Recheck hardware torque after initial 100 miles (160 km) of driving.

Porquê escolher a COWIN Auto Parts?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive chassis & suspension components.
Our Tesla Model S front stabilizer bar links are produced under IATF16949-certified processes, with precision CNC machining,
induction-hardened ball studs and rigorous lifecycle testing to meet or exceed OEM steering/suspension performance standards for global EV aftermarket clients.