Contacto
Ac Compressor
Ac Compressor
Ac Compressor
Ac Compressor

Air Con Compressor/Pump 1K0820803S PXE16 8680P VW Audi Seat Skoda

AC Compressor/Pump – 1K0820803S / PXE16 / 8680P
OEM-standard Sanden PXE16 A/C compressor for VW, Audi, Seat, Skoda (VAG Group).
Compressor Type: Sanden PXE16 | Voltage: 12V | Pulley: 6-Groove (PV6 / 6PK) ~110mm
Direct replacement, clutch included, compatible with OE 1K0820803S, 8680P, 1601, 8675, 8681.
Refrigerant: R134a | Oil: PAG 46 (SP-10).

Obter cotações imediatas

Air Con Compressor/Pump 1K0820803S PXE16 8680P for VW Audi Seat Skoda | Sanden PXE16 OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

 

 AC Compressor – Sanden PXE16 (VW Audi Seat Skoda VAG Group)

Restore factory-level cabin cooling with the COWIN OEM-Standard Sanden PXE16 AC Compressor.
Engineered to match OE specifications for VAG Group platforms (1K chassis-based models), this unit delivers
stable displacement, low-noise operation and direct bolt-on fitment without modifications.

Principais caraterísticas e vantagens

  • Montagem OEM: Direct replacement for 1K0820803S, 8680P and cross-referenced Sanden PXE16 series (1601, 8675, 8681, 4573, etc.).
  • VAG Coverage: Compatible with VW Golf V/VI, Passat B6/B7, Jetta, Touran, Caddy, Audi A3 8P, Seat Leon/Altea, Skoda Octavia II/Superb II, etc.
  • Plug & Play: Complete assembly with PV6 pulley, electromagnetic clutch and mounting points—no fabrication required.
  • Efficient Cooling: PXE16 piston design optimized for 1.6L–2.0L TDI & TSI A/C loads with rapid recovery.
  • 100% Tested: Each unit validated for internal pressure, vacuum retention, clutch engagement and operational noise.

🚗 Vehicle Compatibility (Partial Reference)

Marca Modelo Chassis / Plataforma Motor Intervalo de anos
Volkswagen Golf V / VI, Jetta, Passat B6/B7, Touran, Caddy, Eos, Tiguan 1K / 5K / 3C / 1T / 2K 1.6 / 1.9 / 2.0 TDI & TSI ~2003–2013
Audi A3 (8P), TT (8J) 8P / 8J 1.6 / 1.9 / 2.0 TDI & TSI ~2003–2013
Assento Leon, Altea, Toledo, Alhambra 1P / 5P / 7M 1.6 / 1.9 / 2.0 TDI & TSI ~2004–2015
Skoda Octavia II, Superb II, Yeti 1Z / 3T / 5L 1.6 / 1.9 / 2.0 TDI & TSI ~2004–2015

⚙️ Especificações técnicas

  • Produto: AC Compressor / Air Con Pump (Automotive A/C)
  • OE Part Number: 1K0820803S, 1K0820803G, 1K0820803Q, 1K0820859F, 1K0820808B
  • Sanden Ref: 8680P, 8680, 8681, 8681P, 8675, 8676, 1601, 1615, 4573, 1711
  • Compressor Type: Sanden PXE16 (PXV16)
  • Tensão: 12V
  • Pulley: 6-Groove (PV6 / 6PK), ~110mm Diameter
  • Clutch: Included & Pre-assembled
  • Refrigerant: R134a
  • Compressor Oil: PAG 46 (SP-10, ≈110–150ml)
  • Mounting: Direct Tangent / Flange Mount
  • Instalação: Direct Bolt-On / Plug & Play
  • Qualidade: 100% Pressure, Leak & Performance Tested

🛠️ Nota de instalação

Disconnect the vehicle battery before removal to protect the ECU and wiring.
Recover refrigerant using certified A/C recovery equipment—do not vent R134a.
If the old compressor failed internally, thoroughly flush condenser, evaporator and lines; replace receiver drier / accumulator and expansion valve (TXV).
Evacuate system under vacuum for ≥30 minutes and confirm stable vacuum before recharging to spec.
Check clutch engagement, high/low side pressures and vent temperature after installation.

Porquê escolher a COWIN Auto Parts?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive components.
Our Sanden PXE16 compressors for VAG Group vehicles are produced under strict QC, simulating real-world
load conditions to ensure sealing integrity, efficient cooling and long-term durability for global aftermarket clients.

 

FAQs sobre produtos personalizados

cowin é uma empresa líder na indústria de autopeças da China. Aderimos a tecnologias profissionais, produtos de alto desempenho e excelente serviço pós-venda para atender às necessidades dos clientes em todo o mundo. cowin China vai se esforçar para ser o seu fornecedor one-stop. Apresente os seus requisitos específicos e nós trabalharemos consigo para encontrar soluções!

Sim, podemos fornecer uma garantia de um ano para cada produto, para que possa vender sem preocupações.

Pode adicionar o seu logótipo ao nosso produto, e tudo isto pode ser personalizado de acordo com as suas necessidades.

Sim, fornecer desenhos de conceção do produto e requisitos de dimensão.

 

Os produtos em stock podem ser entregues no prazo de 7 dias, enquanto o prazo de entrega para a produção em massa é de 30-60 dias após a receção do depósito.

 

O prazo de entrega produzirá efeitos nas seguintes condições: (1) Recebemos o seu depósito; (2) Obtivemos a sua confirmação final dos produtos.

 

Se o nosso prazo de entrega não puder cumprir o seu prazo, queira comunicar as suas necessidades específicas ao seu representante de vendas.

 

Em todos os casos, faremos todos os esforços para satisfazer as suas necessidades, e podemos fazê-lo na maioria dos casos.

Sim, utilizamos sempre embalagens de exportação de alta qualidade. Para as mercadorias perigosas, também utilizamos embalagens profissionais para mercadorias perigosas; as embalagens profissionais e os requisitos de embalagem não normalizados podem implicar custos adicionais.

Temos uma equipa de serviço profissional, manteremos informações actualizadas sobre a produção/embalagem/expedição/entrega quando fizer uma encomenda.

Os clientes também pesquisaram

Um fornecedor chinês profissional de produtos multifuncionais, incluindo peças exteriores para automóveis, peças para motores, peças para chassis, etc. Apresentamos-lhe várias soluções alternativas abaixo.

Wholesale Rear Left Control Arm for Tesla Model 3 (2017-2022). Set of 5, OEM 104445100F. Premium COWIN suspension parts for bulk buyers and distributors.

Rear Lower Aft Link Assembly – 1044451-00-F (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower aft link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Aft Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044451-00-F, 1044451-00-E, 1044451-00-D
Material: High-strength steel with proprietary rust-inhibitive coating and premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

 

Ler mais »

OE Standard / High Performance 2018 Tesla Model 3 Rear Lower Fore Link 1044444-00-A

Rear Lower Fore Link – 1044444-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower fore link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Forward Control Arm Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044444-00-A, 1044444-00-B, 1044441-00-F
Material: High-strength forged aluminum alloy/steel with premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Ler mais »

Suspension Upper Control Arm Link for Tesla Model S/X (2012-2020). OEM 1027421-00-E. Heavy-duty suspension solution from COWIN. Inquire for wholesale rates.

Rear Upper Link Assembly – 1027421-00-E (LEFT & RIGHT Compatible)
NEW OEM-standard rear upper link assembly for Tesla Model S (2012–2020) and Model X.
Position: Rear Axle Upper Control Arm / Upper Link Assembly
OE Reference: 1027421-00-E, 1021418-00-A, 1027426-00-C
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joints.
Direct bolt-on OEM replacement to restore suspension geometry and eliminate clunking.

Ler mais »

One-Stop Supplier Rear axle stabilizer bar left/right 1027491 00 A Compatible with Tesla Model X

Rear Stabilizer Bar Link (Sway Bar End Link) – 1027491-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear stabilizer bar link for Tesla Model X (2015–2023).
Position: Rear Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1027491-00-A
Material: High-strength iron/steel with corrosion-resistant coating.
Direct bolt-on replacement to eliminate rear-end clunking noises and restore suspension stability.

Ler mais »

Suspension Rod Front L or R Stabilizer Links Sway Bar Link Tie Rod End for 2014-2020 TESLA Model S 1030603 00 B 103060300B 100% Tested

Front Stabilizer Bar Link (Sway Bar End Link) – 1030603-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard front stabilizer bar link for Tesla Model S (2014–2020).
Position: Front Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1030603-00-B, 103060300B, 1030603-00-A, 1030603-00-C
Material: High-strength powder-coated steel with pre-installed sealed ball joints and rubber dust boots.
Direct bolt-on replacement to eliminate front-end clunking noises and restore suspension stability.

Ler mais »

Rear Lower Control Arm for Tesla Model S (2012-2018). OE 6006774-00-B. Robust construction and factory-direct wholesale pricing from COWIN Auto Parts.

Rear Lower Control Arm – 6006774-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower control arm for Tesla Model S (2012–2018) and Model X.
Position: Rear Axle Lower Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 6006774-00-B, 600677400B, 1021416-00-D, 1027451-00-F
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joint.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Ler mais »

Request a Custom Quote

logo

Access our full range of 5,000+ IATF 16949 certified auto parts.

*Respeitamos a sua confidencialidade e todas as informações são protegidas.

Download Our 2026 Product Catalogue

I’m Leo, the head of sales team at Cowin
.Tell us which vehicle series (e.g., Tesla, VW, Audi) you are most interested in.

Carson
Paulo
Tom