Rear Suspension Integral Link (Trailing Arm) 6006895-00-A for Tesla Model S & Model X | Rear Axle Lower Control Arm LEFT & RIGHT Compatible – COWIN China TOP-QUALITY Auto Parts Supplier

🛠️ Rear Suspension Integral Link – OEM 6006895-00-A (Tesla Model S & Model X)

Eliminate rear-end clunking, uneven tire wear, rear steering vagueness and alignment drift with the COWIN OEM-Standard Rear Suspension Integral Link (6006895-00-A).
Precision-manufactured to match Tesla rear trailing arm specifications, this integral link maintains correct rear wheel geometry,
improves ride stability and handling precision with direct bolt-on fitment for both Model S and Model X platforms.

✅ Wesentliche Merkmale und Vorteile

• OEM-Anpassung: Direct replacement for 6006895-00-A, 600689500A – exact length, mounting points and bushing angles for both sides.
• Both Sides Same Part: Symmetrical design fits Rear Left (LH) AND Rear Right (RH) – no need to distinguish side-specific part numbers.
• Fahrzeugabdeckung: Tesla Model S (2012–2023+ all trims including Plaid) & Tesla Model X (2015–2023+ all trims including Plaid).
• Langlebige Konstruktion: Forged aluminum alloy arm + heat-treated ball stud + anti-rust coating (≥120h salt spray test).
• Vollständige Montage: Supplied with pre-pressed bushings, ball joint and mounting hardware for full service replacement.
• 100% Tested: Validated for fatigue (1,000,000 cycles), alignment geometry and NVH (noise, vibration, harshness) under load.

🚗 Fahrzeugkompatibilität

⚙️ Technische Daten

• Produkt: Rear Suspension Integral Link / Trailing Arm / Rear Lower Control Arm
• Zustand: Brand NEW (Sold Individually)
• OE Part Number: 6006895-00-A, 600689500A
• Cross Reference: 6006895-00-B, 6006895-00-C, 6006895-00-D (variant revisions)
• Seite: Both Sides (LH + RH Symmetrical / Interchangeable)
• Material: High-Strength Forged Aluminum Alloy
• Bushing: Premium Rubber / PU Bushing (Pre-installed)
• Ball Joint: Included & Pre-pressed
• Oberflächenbehandlung: Epoxy Coating / Anodized + Anti-Corrosion (≥120h Salt Spray)
• Einbau: Direct Bolt-On / Plug & Play
• Hardware: Included (Mounting Bolts as applicable)
• Qualität: 100% Dimensional & Fatigue Tested (IATF16949 Process)

🛠️ Installationshinweise

Professional installation is strongly recommended due to suspension safety criticality.
Support the vehicle securely on a lift or jack stands before disassembly; enable Jack Mode on the touchscreen (Controls > Service > Jack Mode).
This part fits BOTH rear left and right sides – confirm quantity (2 pcs recommended per axle) before ordering.
Use proper torque specifications for all integral link mounting bolts (refer to Tesla service manual for exact values, typically ~100–120 Nm for large chassis bolts).
Final tightening should be performed at ride height (vehicle on ground or suspension loaded) to prevent premature bushing wear and geometry shift.
A full 4-wheel alignment must be performed after installation to set correct rear toe and camber angles.
Recheck hardware torque after initial 100 miles (160 km) of driving.
Note: Inspect the rear subframe mounting points for any signs of wear, elongation or corrosion during installation.

🏭 Warum COWIN Auto Parts wählen?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive chassis & suspension components.
Our Tesla Model S/X rear integral links are produced under IATF16949-certified processes, with CNC machining, robotic welding
and rigorous fatigue testing to meet or exceed OEM durability standards for global EV aftermarket clients.