Rear Axle Stabilizer Bar Link 1027491-00-A for Tesla Model X | Rear Sway Bar End Link Left & Right Compatible – COWIN China TOP-QUALITY Auto Parts Supplier

🛠️ Rear Stabilizer Bar Link – OEM 1027491-00-A (Tesla Model X 2015–2023)

Eliminate rear suspension clunking, body roll instability and uneven tire wear with the COWIN OEM-Standard Rear Stabilizer Bar Link (1027491-00-A).
Precision-manufactured to match Tesla Model X rear sway bar specifications, this symmetrical end link connects the rear stabilizer bar to the suspension arm,
reduces NVH (noise, vibration, harshness) and delivers direct bolt-on fitment without modification for Model X platforms (2015–2023).[1](@ref)

✅ Wesentliche Merkmale und Vorteile

• OEM-Anpassung: Direct replacement for 1027491-00-A – exact length, thread pitch and ball stud size for both sides.[1](@ref)
• Both Sides Same Part: Symmetrical design fits Rear Left (LH) AND Rear Right (RH) – no need to distinguish side-specific part numbers.[1](@ref)
• Fahrzeugabdeckung: Tesla Model X (2015–2023 all trims including 60D, 75D, 90D, 100D, P90D, P100D, Long Range, Plaid).[4](@ref)
• Langlebige Konstruktion: High-strength iron/steel housing + anti-corrosion coating (≥96h salt spray test) to withstand harsh road conditions.[1](@ref)
• Vollständige Montage: Supplied with pre-installed rubber dust boots, lubricated ball joints and mounting nuts for full service replacement.
• 100% Tested: Validated for rotational torque, pull-out strength and sealing performance under simulated load conditions.

🚗 Fahrzeugkompatibilität

⚙️ Technische Daten

• Produkt: Rear Stabilizer Bar Link / Sway Bar End Link (Sold Individually)
• Zustand: Brand NEW
• OE Part Number: 1027491-00-A
• Seite: Both Sides (LH + RH Symmetrical / Interchangeable)
• Material: High-Strength Iron / Steel
• Ball Stud: Heat-Treated, Pre-Lubricated (Grease-Filled)
• Dust Boot: Premium Rubber, Weather-Sealed (Pre-installed)
• Oberflächenbehandlung: Zinc Plating + Corrosion-Resistant Coating (≥96h Salt Spray)
• Einbau: Direct Bolt-On / Plug & Play
• Hardware: Mounting Nuts Included
• Qualität: 100% Dimensional & Torque Tested (IATF16949 Process)

🛠️ Installationshinweise

Professional installation is recommended for suspension components.
Support the vehicle securely on a lift or jack stands before disassembly; enable Jack Mode on the touchscreen (Controls > Service > Jack Mode).
This part fits BOTH rear left and right sides – confirm quantity (2 pcs recommended per axle) before ordering.
Counter-hold the ball stud with a hex socket while loosening/tightening the nut to prevent stud rotation.
Final tightening should be performed at ride height (vehicle supported by wheels on ground or suspension loaded) to avoid premature bushing/ball joint wear.
Although an alignment is generally not required for sway bar links alone, a suspension inspection and alignment check is recommended after any chassis work.
Recheck hardware torque after initial 100 miles (160 km) of driving.

🏭 Warum COWIN Auto Parts wählen?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive chassis & suspension components.
Our Tesla Model X rear stabilizer bar links are produced under IATF16949-certified processes, with precision CNC machining,
induction-hardened ball studs and rigorous lifecycle testing to meet or exceed OEM suspension performance standards for global EV aftermarket clients.