Front Lower Curved Control Arm Pair 1041570-00-B 1041575-00-B L+R for Tesla Model S & Model X | Front Lower Fore Link Compliance Arm OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

🛠️ Front Lower Curved Control Arm Pair – OEM 1041570-00-B & 1041575-00-B (Tesla Model S / X)

Eliminate front suspension clunking, steering vagueness, uneven tire wear and alignment drift with the COWIN OEM-Standard Front Lower Curved Control Arm Pair.
Precision-manufactured to match Tesla 1041570-00-B (Left) and 1041575-00-B (Right) specifications, these curved fore/compliance links restore factory suspension geometry,
improve ride stability and deliver direct bolt-on fitment without modification for both Model S and Model X platforms.

✅ Wesentliche Merkmale und Vorteile

• Complete Pair: Includes both LH (1041570-00-B) and RH (1041575-00-B) front lower curved control arms — no need to order separately.
• OEM-Anpassung: Direct replacement for 1041570-00-B / 1041575-00-B and cross-referenced part numbers (1041570-00-A, 1041575-00-A, 6007998-00-C etc.).
• Fahrzeugabdeckung: Tesla Model S (2012–2021+ / 2016–2025 variants) & Tesla Model X (2015–2021+ / 2016–2025 variants) all trims including Plaid.
• Curved Fore Link Design: Matches original compliance arm geometry to maintain proper caster/camber behavior and NVH control.
• Langlebige Konstruktion: Forged aluminum alloy arms + heat-treated ball stud + anti-rust coating (≥120h salt spray test).
• Vollständige Montage: Supplied with pre-pressed bushings, ball joints and mounting hardware for full service replacement.
• 100% Tested: Validated for fatigue (1,000,000 cycles), alignment geometry and noise/vibration under simulated load conditions.

🚗 Fahrzeugkompatibilität

⚙️ Technische Daten

• Produkt: Front Lower Curved Control Arm / Fore Link / Compliance Arm (Pair L+R)
• Zustand: Brand NEW (Set of 2)
• OE Part Number (LH): 1041570-00-B, 1041570-00-A
• OE Part Number (RH): 1041575-00-B, 1041575-00-A
• Cross Reference: 6007998-00-C, 6006664-00-C, 1420346-00-C, 1620346-00-B
• Material: High-Strength Forged Aluminum Alloy
• Bushing: Premium Rubber / PU Bushing (Pre-installed)
• Ball Joint: Included & Pre-pressed (Both Sides)
• Oberflächenbehandlung: Epoxy Coating / Anodized + Anti-Corrosion (≥120h Salt Spray)
• Einbau: Direct Bolt-On / Plug & Play
• Hardware: Included (Mounting Bolts as applicable)
• Qualität: 100% Dimensional & Fatigue Tested (IATF16949 Process)

🛠️ Installationshinweise

Professional installation is strongly recommended due to suspension safety criticality.
Support the vehicle securely on a lift or jack stands before disassembly.
This set includes both left and right curved control arms — replacing as a pair ensures balanced suspension geometry and consistent compliance characteristics.
Use proper torque specifications for all control arm mounting bolts (refer to Tesla service manual for exact values, typically ~20 Nm + angle torque) and final tighten under load if required.
A full 4-wheel alignment must be performed after installation to prevent uneven tire wear and ensure optimal handling and range efficiency.

🏭 Warum COWIN Auto Parts wählen?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive chassis & suspension components.
Our Tesla Model S/X front lower curved control arm pairs are produced under IATF16949-certified processes, with CNC machining, robotic welding
and rigorous fatigue testing to meet or exceed OEM durability standards for global EV aftermarket clients.