Rear Left & Right Suspension Control Arm Toe Link 6006840-00-B for Tesla Model S 2012–2020 | Rear Axle Toe Link / Rear Lower Control Arm OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

🛠️ Rear Suspension Toe Link – OEM 6006840-00-B (Tesla Model S 2012–2020)

Eliminate rear-end clunking, rear steering vagueness, uneven rear tire wear and alignment drift with the COWIN OEM-Standard Rear Toe Link (6006840-00-B).
Precision-manufactured to match Tesla Model S rear suspension specifications, this toe link maintains correct rear wheel geometry,
improves ride stability and handling precision with direct bolt-on fitment for Model S platforms (2012–2020).

✅ Ключевые особенности и преимущества

• OEM Fitment: Direct replacement for 6006840-00-B and cross-referenced part numbers (-00-A, -00-C variants).
• Both Sides Same Part: Symmetrical design fits Rear Left (LH) AND Rear Right (RH) – no need to distinguish side-specific part numbers.
• Покрытие автомобиля: Tesla Model S (2012–2020 all trims: 60/70/75/85/90/100/P85D/P100D/Ludicrous/LR).
• Прочная конструкция: Forged aluminum alloy arm + heat-treated ball stud + anti-rust coating (≥120h salt spray test).
• Полная сборка: Supplied with pre-pressed bushings, ball joint and mounting hardware for full service replacement.
• 100% Tested: Validated for fatigue (1,000,000 cycles), alignment geometry and NVH (noise, vibration, harshness) under load.

🚗 Совместимость с автомобилями

⚙️ Технические характеристики

• Продукт: Rear Suspension Toe Link / Rear Lower Control Arm (Sold Individually)
• Состояние: Brand NEW
• OE Part Number: 6006840-00-B, 600684000B
• Cross Reference: 6006840-00-A, 6006840-00-C, 1044630-00-B, 1044630-00-A, 1044630-00-C
• Бок: Both Sides (LH + RH Symmetrical / Interchangeable)
• Материал: High-Strength Forged Aluminum Alloy
• Bushing: Premium Rubber / PU Bushing (Pre-installed)
• Ball Joint: Included & Pre-pressed
• Обработка поверхности: Epoxy Coating / Anodized + Anti-Corrosion (≥120h Salt Spray)
• Установка: Direct Bolt-On / Plug & Play
• Hardware: Included (Mounting Bolts as applicable)
• Качество: 100% Dimensional & Fatigue Tested (IATF16949 Process)

🛠️ Примечание по установке

Professional installation is strongly recommended due to suspension safety criticality.
Support the vehicle securely on a lift or jack stands before disassembly; enable Jack Mode on the touchscreen (Controls > Service > Jack Mode).
This part fits BOTH rear left and right sides – confirm quantity (2 pcs recommended per axle) before ordering.
Use proper torque specifications for all toe link mounting bolts (refer to Tesla service manual for exact values, typically ~100–120 Nm for rear subframe bolts).
Final tightening should be performed at ride height (vehicle on ground or suspension loaded) to prevent premature bushing wear and alignment shift.
A full 4-wheel alignment must be performed after installation to set correct rear toe and camber angles and prevent uneven tire wear.
Recheck hardware torque after initial 100 miles (160 km) of driving.
Note: Inspect the rear subframe mounting points for any signs of wear, elongation or corrosion during installation. The toe link is critical for rear wheel alignment — any play or looseness will directly affect tire wear and high-speed stability.

🏭 Почему стоит выбрать автозапчасти COWIN?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive chassis & suspension components.
Our Tesla Model S rear toe links are produced under IATF16949-certified processes, with CNC machining, robotic welding
and rigorous fatigue testing to meet or exceed OEM durability standards for global EV aftermarket clients.