Front Stabilizer Bar Link (Sway Bar End Link) 6007098-00-A Left Driver Side for Tesla Model S 2012–2016 RWD | Front Axle Suspension Stabilizer Rod OEM Replacement – COWIN China TOP-QUALITY Auto Parts Supplier

🛠️ Front Stabilizer Bar Link – OEM 6007098-00-A (Tesla Model S 2012–2016 RWD LEFT)

Eliminate front suspension clunking over bumps, steering wander and body roll instability with the COWIN OEM-Standard Front Stabilizer Bar Link (6007098-00-A).
Precision-manufactured to match Tesla RWD Model S specifications, this left-side sway bar end link restores factory anti-roll bar geometry,
reduces NVH (noise, vibration, harshness) and delivers direct bolt-on fitment without modification for 2012–2016 RWD Model S vehicles.

Principales características y ventajas

• Ajuste OEM: Direct replacement for 6007098-00-A, 600709800A, 1047896-00-A – exact thread pitch, length and ball stud size.
• Cobertura del vehículo: Tesla Model S RWD (Rear Wheel Drive / Single Motor) 2012–2016 (up to approx. Mar 2016 build). Not for AWD/Dual Motor.
• Side Specific: Left (Driver Side) application; right side requires 6008915-00-A (different part numbers per side).
• Construcción duradera: Powder-coated forged steel housing + heat-treated ball stud + anti-corrosion coating (≥96h salt spray test).
• Montaje completo: Supplied with pre-installed rubber dust boots, lubricated ball joints and mounting nuts for full service replacement.
• 100% Tested: Validated for rotational torque, pull-out strength and sealing performance under simulated load conditions.

🚗 Compatibilidad con vehículos

⚙️ Especificaciones técnicas

• Producto: Front Stabilizer Bar Link / Sway Bar End Link (Coupling Rod)
• Estado: Brand NEW (Sold Individually)
• OE Part Number: 6007098-00-A, 600709800A
• Cross Reference: 1047896-00-A, Delphi TC8265, Febi 175655, Moog K750967
• Lateral: Left (Driver Side) – RWD Only
• Material: High-Strength Powder-Coated Steel
• Ball Stud: Heat-Treated, Pre-Lubricated (Grease-Filled)
• Dust Boot: Premium Rubber, Weather-Sealed (Pre-installed)
• Tratamiento de la superficie: Zinc Plating + Powder Coating (≥96h Salt Spray)
• Instalación: Direct Bolt-On / Plug & Play
• Hardware: Mounting Nuts Included
• Calidad: 100% Dimensional & Torque Tested (IATF16949 Process)

🛠️ Nota de instalación

Professional installation is strongly recommended due to suspension safety criticality.
Support the vehicle securely on a lift or jack stands before disassembly; enable Jack Mode on the touchscreen (Controls > Service > Jack Mode).
This part is side-specific (LEFT = 6007098-00-A); confirm side before installation – RIGHT side uses 6008915-00-A.
When removing/installing, counter-hold the ball stud with a 5mm hex socket while loosening/tightening the 15mm nut to prevent stud rotation.
Torque specification (reference Tesla service data): 70 Nm (51.6 ft-lbs) for both stabilizer bar and knuckle mounting nuts; always use new nuts.
It is recommended to replace stabilizer links in left + right pairs to maintain balanced suspension response and prevent handling inconsistencies.
Perform a road test after installation to verify elimination of clunking noises over bumps.

🏭 ¿Por qué elegir COWIN Auto Parts?

COWIN (Gaoyun) is a professional Chinese manufacturer and supplier of high-precision automotive chassis & suspension components.
Our Tesla Model S stabilizer bar links are produced under IATF16949-certified processes, with precision CNC machining,
induction-hardened ball studs and rigorous lifecycle testing to meet or exceed OEM steering/suspension performance standards for global EV aftermarket clients.