APPLICATION:Emperor 100P Beiqi Foton 4JB1 Keizu Quanshun
APPLICATION:Emperor 100P Beiqi Foton 4JB1 Keizu Quanshun
APPLICATION:Emperor 100P Beiqi Foton 4JB1 Keizu Quanshun
APPLICATION:Emperor 100P Beiqi Foton 4JB1 Keizu Quanshun
APPLICATION:Emperor 100P Beiqi Foton 4JB1 Keizu Quanshun
APPLICATION:Emperor 100P Beiqi Foton 4JB1 Keizu Quanshun
APPLICATION:Emperor 100P Beiqi Foton 4JB1 Keizu Quanshun
APPLICATION:Emperor 100P Beiqi Foton 4JB1 Keizu Quanshun

8-94360426-0 Fuel Filter | Isuzu 100P Foton 4JB1 Diesel Filter

Fuel Filter / Water Separator – OEM 8‑94360426‑0 / 8‑97049708‑1

Fuel filter for Isuzu 100P, Foton, JMC Keizu, 4JB1 diesel engines.
OEM: 8‑94360426‑0 / 8‑97049708‑1
Size: 100 × H90 mm
High‑efficiency diesel filtration.
Direct replacement.

🔧 Fuel Filter / Water Separator – OEM 8‑94360426‑0 / 8‑97049708‑1 (Isuzu 100P / Foton / JMC / Keizu)

Ensure clean fuel delivery and maximum engine protection with the
COWIN OEM‑Standard Fuel Filter / Water Separator.
Diseñado para Isuzu 100P, Beiqi Foton, JMC Keizu, and 4JB1 diesel engines, this high‑efficiency filter effectively removes water, rust, and contaminants from diesel fuel, preventing injector damage and extending engine life.

Principales características y ventajas

  • Referencia OEM: Sustitución directa con referencia a las referencias
    8‑94360426‑0 / 8‑97049708‑1.
  • Aplicación: Específicamente diseñado para:
    • Isuzu 100P light trucks
    • Beiqi Foton light trucks & vans
    • JMC Keizu (Quanshun) series
    • Vehicles equipped with 4JB1 diesel engines
  • Filter Type: Fuel Filter / Water Separator.
  • Eficacia de filtración: High‑efficiency media captures fine particles and separates water.
  • Fuel System Protection: Prevents injector clogging and fuel system wear.
  • Construcción duradera: Reinforced housing and high‑quality filter media.
  • Sustitución directa: Matches original dimensions and specifications.

🚚 Vehicle Compatibility

Marca Model / Series Motor OEM Numbers
Isuzu 100P 4JB1 8‑94360426‑0 / 8‑97049708‑1
Foton Light Trucks / Vans 4JB1 8‑94360426‑0 / 8‑97049708‑1
JMC Keizu / Quanshun 4JB1 8‑94360426‑0 / 8‑97049708‑1

📐 Product Dimensions

  • Outer Diameter: 100 mm
  • Altura: 90 mm

⚙️ Especificaciones técnicas

  • Números OEM: 8‑94360426‑0 / 8‑97049708‑1
  • Producto: Fuel Filter / Water Separator
  • Size: 100 × H90 mm
  • Instalación: Sustitución directa
  • Calidad: 100% Probado e inspeccionado

🛠️ Nota de instalación

Professional installation is recommended.
Relieve fuel system pressure before replacement.
Drain water from the separator as required.
Prime the fuel system after installation to avoid air locks.
Replace filters at intervals recommended by the vehicle manufacturer.

🏭 ¿Por qué elegir COWIN Auto Parts?

COWIN (Gaoyun) specializes in steering, brake, and filtration system components.
Every filter is inspected for material integrity, dimensional accuracy, and filtration performance.

Preguntas frecuentes sobre productos personalizados

cowin es una empresa líder en la industria de piezas de automóviles de China. Nos adherimos a las tecnologías profesionales, productos de alto rendimiento y excelente servicio post-venta para satisfacer las necesidades de los clientes en todo el mundo. cowin China se esforzará por ser su proveedor de ventanilla única. Preséntenos sus requisitos específicos y trabajaremos con usted para encontrar soluciones.

Sí, podemos ofrecer un año de garantía para cada producto, para que pueda vender sin preocupaciones.

Puede añadir su logotipo a nuestro producto, y todos ellos pueden personalizarse según sus necesidades.

Sí, facilite los planos de diseño del producto y los requisitos de tamaño.

 

Los productos en stock pueden entregarse en 7 días, mientras que el plazo de producción en serie es de 30-60 días tras recibir el depósito.

 

El plazo de entrega entrará en vigor en las siguientes condiciones: (1) Hemos recibido su depósito; (2) Hemos obtenido su confirmación final de los productos.

 

Si nuestro plazo de entrega no se ajusta a sus necesidades, comuníquelo a su representante de ventas.

 

En cualquier caso, haremos todo lo posible por satisfacer sus necesidades, y podremos hacerlo en la mayoría de los casos.

Sí, siempre utilizamos embalajes de exportación de alta calidad. En el caso de mercancías peligrosas, también aplicamos un embalaje profesional para mercancías peligrosas; el embalaje profesional y los requisitos de embalaje no estándar pueden conllevar costes adicionales.

Contamos con un equipo de servicio profesional, mantendremos información actualizada sobre producción/embalaje/envío/entrega cuando realice un pedido.

Los clientes también buscaron

Un proveedor chino profesional de productos multifuncionales que incluyen piezas exteriores de automóviles, piezas de motor, piezas de chasis, etc. A continuación le ofrecemos varias soluciones alternativas.

Wholesale / Bulk Price 2017 – 2022 TESLA MODEL 3 REAR LEFT SIDE CONTROL ARM SET OF 5 OEM 104445100F

Rear Lower Aft Link Assembly – 1044451-00-F (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower aft link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Aft Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044451-00-F, 1044451-00-E, 1044451-00-D
Material: High-strength steel with proprietary rust-inhibitive coating and premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

## 详情页 HTML 代码

Leer Más »

OE Standard / High Performance 2018 Tesla Model 3 Rear Lower Fore Link 1044444-00-A

Rear Lower Fore Link – 1044444-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower fore link for Tesla Model 3 (2017–2023) and Model Y (2020–2024).
Position: Rear Axle Lower Forward Control Arm Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1044444-00-A, 1044444-00-B, 1044441-00-F
Material: High-strength forged aluminum alloy/steel with premium rubber bushings.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Leer Más »

OE Standard / High Performance 12-20 Tesla Model S X Rear Left Suspension Upper Control Arm Link 1027421-00-E

Rear Upper Link Assembly – 1027421-00-E (LEFT & RIGHT Compatible)
NEW OEM-standard rear upper link assembly for Tesla Model S (2012–2020) and Model X.
Position: Rear Axle Upper Control Arm / Upper Link Assembly
OE Reference: 1027421-00-E, 1021418-00-A, 1027426-00-C
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joints.
Direct bolt-on OEM replacement to restore suspension geometry and eliminate clunking.

Leer Más »

One-Stop Supplier Rear axle stabilizer bar left/right 1027491 00 A Compatible with Tesla Model X

Rear Stabilizer Bar Link (Sway Bar End Link) – 1027491-00-A (LEFT & RIGHT Compatible)
NEW OEM-standard rear stabilizer bar link for Tesla Model X (2015–2023).
Position: Rear Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1027491-00-A
Material: High-strength iron/steel with corrosion-resistant coating.
Direct bolt-on replacement to eliminate rear-end clunking noises and restore suspension stability.

Leer Más »

Suspension Rod Front L or R Stabilizer Links Sway Bar Link Tie Rod End for 2014-2020 TESLA Model S 1030603 00 B 103060300B 100% Tested

Front Stabilizer Bar Link (Sway Bar End Link) – 1030603-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard front stabilizer bar link for Tesla Model S (2014–2020).
Position: Front Axle Stabilizer Link / Sway Bar End Link – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 1030603-00-B, 103060300B, 1030603-00-A, 1030603-00-C
Material: High-strength powder-coated steel with pre-installed sealed ball joints and rubber dust boots.
Direct bolt-on replacement to eliminate front-end clunking noises and restore suspension stability.

Leer Más »

One-Stop Supplier 2012-2018 Compatible With Tesla Model S Rear Right/Left Lower Control Arm Oem 6006774-00-B 600677400B

Rear Lower Control Arm – 6006774-00-B (LEFT & RIGHT Compatible)
NEW OEM-standard rear lower control arm for Tesla Model S (2012–2018) and Model X.
Position: Rear Axle Lower Control Arm – Fits Both Left (LH) and Right (RH) Sides
OE Reference: 6006774-00-B, 600677400B, 1021416-00-D, 1027451-00-F
Material: High-strength forged aluminum alloy with premium rubber/PU bushings & ball joint.
Direct bolt-on replacement to restore rear suspension geometry, eliminate clunking and improve handling stability.

Leer Más »

Póngase en contacto con nosotros

logo

Obtenga más beneficios desde Enviar el formulario de información

*Respetamos su confidencialidad y toda la información está protegida.

Póngase en contacto con nosotros ahora mismo, obtenga respuesta hoy mismo.

Soy Leo, el jefe del equipo de ventas de Cowin . Mi equipo y yo estaremos encantados de conocerle y saber todo sobre su negocio, requisitos y expectativas.
Carson
Paul
Tom