47201-0K020 Brake Master Cylinder | Toyota 4WD Brake Parts

🔧 Brake Master Cylinder – OEM 47201‑0K020 (Toyota 4×4 Vehicles)

Ensure safe and consistent braking with the
Cilindro maestro de freno COWIN OEM-Standard.
Diseñado para Toyota 4×4 (four‑wheel drive) vehicles, this high‑quality hydraulic unit delivers precise brake pressure and long‑term reliability under on‑road, off‑road, and load‑bearing conditions.

Principales características y ventajas

• Referencia OEM: Sustitución directa con referencia al número de pieza
  47201‑0K020.
• Aplicación: Específicamente diseñado para:
  • Toyota 4×4 pickups, SUVs, and off‑road vehicles using this specification
• Component Type: Brake Master Cylinder (hydraulic).
• Braking Performance: Stable pressure output under repeated braking.
• Construcción duradera: Aluminum / cast iron body with corrosion‑resistant finish.
• Seal Quality: High‑temperature resistant rubber cups.
• Sustitución directa: Matches original ports and mounting points.

🚗 Compatibilidad con vehículos

⚙️ Especificaciones técnicas

• Número OEM: 47201‑0K020
• Part Type: Cilindro principal de freno
• Tipo de fluido: DOT 3 / DOT 4 Brake Fluid
• Port Type: OE‑spec inlet / outlet ports
• Instalación: Direct bolt‑on replacement
• Calidad: 100% Probado e inspeccionado

🛠️ Nota de instalación

Se recomienda encarecidamente una instalación profesional.
Brake fluid must be completely flushed and replaced.
System must be properly bled to remove all air.
Check for leaks after installation before driving.

🏭 ¿Por qué elegir COWIN Auto Parts?

COWIN (Gaoyun) specializes in brake, steering, suspension, and filtration components.
Every brake master cylinder is pressure‑tested for leakage and performance.